puerto serie KO (Kaon 570)
 

:-} hola creo q tengo el puerto RS-232 quemado,la lectura q me da es esta, haber si alguien me puede decir algo, o que puedo hacer
Gacias


driver changed at 3 April 2003=
==============================================
Version 6.1.8 v1
Date Dec 18 2003, Time 19:30:46
NO MICOM :
==============================================
FLASH ID: 0xffff, COM ID: 0xffff
FLASH ID: 0x2782, COM ID: 0x00bf
NO_ACKNOWLEDGE with PC.
0xa0,0x00,0xff,0xa0,0x0f,0x41,
[OTA] E2PROM_Read() Checksum OK !
Jump : 0x7feffffe


STAVMEM_Init()=OK
STAVMEM_CreatePartition()=OK
STEVT_Init()=OK
STPWM_Init()=OK
STCLKRV_Init(CLKRV0)=OK
STI2C_Init(back)=Ok
STI2C_Init(f
STCLKRV_Open(CLKRV0)=OK
STAUD_Init(AUD0)=Ok
STDENC_Init(DENC0, InvOut 0)=OK
STVTG_Init(VTG0)=Ok
STVID_Init(VID0)=driver changed at 3 April 2003=Ok
OSD_Initialize(OK)
[FE] Version : 02.03.07 Last Update : 2004.12.17
___C_0 Detected !!!
[0], CH_ADDR[0xc00b2e30], CH_IDX[-1073009136], TUN_ADDR[0x7fe1c3ac], TUN_IDX[214
5509460]
[0], CH_ADDR[0x00], CH_IDX[-1073009092], TUN_ADDR[0xc00894e4], TUN_IDX[214550946
0]
[REREADCLOCK] 2002-1-1, 0: 0. 1
size : 152
NO SPDIF..

=============================================
VERSION : 2.5.0 (2004.04.09)
MODEL : KSC-570Z (BUYER CODE : 27)
DATE : Nov 06 2005
TIME : 16:35:03
=============================================

FLASH = 0x2782
[MC] Version : 02.02.04 Last Update : 2004.09.25
[TTXOSD] Version:02.01.07, Last Update:04.01.06
[PSI] Version:2.1.27, Last Update:04.08.25
[DB] 4000CH, 8FAV, EPG_WEEK:ON, NEW_COLOCK:OFF, GUI_T:OFF, __K4_OPTION__:OFF, (5
0,4080)
I2C[I2C_E2P_0]= EXIST
Z(16) : 5.8.74 (...)
I2C[I2C_RFMOD]= EXIST
I2C[I2C_MTUNE]= EXIST
I2C[I2C_MCHAN]= EXIST
Hdl->mcChanType = [0x04]
Hdl->mcTuneType = [0x80]
MMI_TYPE :: MMI_A1
MMI_API_VERSION :: 1.2.1
MMI_FLASH_VERSION :: 1.0.0
MMI_E2PROM_VERSION :: 1.0.0
MMI START OK : fa0
MAIN Start : 255
h_av.c, 0421 Error> STAUD_Mute=Err
Hdl->mSharpVersion= 1
####### CI DETECT #######
[CI] Version : 02.02.02 Last Update : 2004.02.02
Hdl->mSharpVersion= 1
Hdl->mSharpVersion= 1
Hdl->mcChanType = [0x04]
Hdl->mcTuneType = [0x80]
FE_GetTunerName(0) = SSP9
FE_GetTunerName(1) = SSP9