Caracteristicas Tecnicas
 

http://www.dream-multimedia-tv.de/en...ucts/DM800.jpg

[U][B]Características Técnicas:[/B][/U]

[B]- 300 MHz MIPS Processor[/B]
- Linux Operating System
[B]- 1 x Smartcard-Reader[/B]
- MPEG2 / H.264 Hardware decoding
- Tuner: DVB-S, optional: DVB-C, DVB-T
- Tuner Module, Plug&Play
- OLED - Display
- 64 MByte Flash, 256 MByte RAM
- SATA
- for use either as internal HDD 2,5“ or eSATA
- unlimited channel lists for TV/Radio
- full automatic service scan
- supports directly bouquet-lists
- supports EPG (electronic program guide)
- supports multiple LNB-Switching control (supports DiSEqC)
- fully adaptable OSD in many languages and skin-support
- S/PDIF Interface for digital bit stream out
- Videotext Decoder
[B]- 10/100Mbit Ethernet Interface[/B]
- 1 x Scart (RGB, FBAS oder S-Video)
[B]- DVI[/B]
[B]- 2 x USB 2.0[/B]
- V.24/RS23B 2.2
- analoge modem for Internet
- extern 12V power supply

[B]DreamBox DM800 technical data[/B]

[B]DBS-Tuner with DVB-S2:[/B]

Frequency Range 950 .... 2150 MHz
Demodulation DVB-S (QPSK); DVB-S2 (8PSK,QPSK)
Symbol rate DVB-S: 2 ... 45 Mbaud/s, SCPC/ MCPC
DVB-S2: 10 – 31 Mbaud/s (8PSK) , 10 –30 Mbaud/s (QPSK)

[B]Video decoder:[/B]
Video Compression MPEG-2 and MPEG-1 compatible, H.246
Video Formats 4:3 / 16:9
Letterbox for 4:3 TV-Device
[B]
Audio decoder:[/B]
Audiocompression MPEG-1 & MPEG-2 Layer I and II, MP3
Audio Mode Dual (main/sub), Stereo
Frequency: 32 kHz, 44.1 kHz, 48 kHz, 16 kHz, 22.05 kHz, 24 kHz

[B]Output analog:[/B]
Output Level L/R 0,5 Vss on 600 Ohm
THD > 60 dB (1 kHz)
Crosstalk < -65 dB

[B]Output digital:[/B]
Output Level 0,5 Vss on 75 Ohm
Sampled Data Filtering 32 kHz, 44.1 kHz, 48 kHz
S/PDIF-Output optical, Toslink

[B]Ausgang Video:[/B]
Ausgangspegel FBAS 1 Vss +/- 0.3 dB an 75 Ohm

Video parameter:
Input Level FBAS 1 Vss +/- 0.3 dB on 75 Ohm
Teletext filter in conformity with ETS 300 472 Standard

[B]TV-Scart:[/B]
Output: FBAS, RGB, S-Video

[B]Serial Interface RS 232:[/B]
Type RS232 bidirectional
Bitrate 115,2 kBit/s max.
Plug Connector SUB-D-9
Function: Update of Firmware

[B]Ethernet:[/B]
10/100 MBit compatible interface
Function: Update of Firmware

[B]Analoge modem:[/B]
analoge modem for Internet connection

[B]SATA Interface:[/B]
- for use either as internal HDD 2,5“ or eSATAor internal 2,5" HDD

[B]USB[/B]
2 x USB 2.0 Host

[B]LNB power and polarisation per tuner:[/B]
LNB Current 500mA max.; short-circuit-protected
LNB Voltage vertical < 14V no load, > 11,5V at 400mA
LNB Voltage horizontal < 20V no load, > 17,3V at 400mA

[B]Count of active satellite position:[/B]
DiSEqC 1.0/1.2 SAT POSITION / SAT OPTION
DiSEqC - Rotor Control

[B]Power consumption:[/B]
< 15W at 12V

[B]External PSU[/B]
Input:
110-240V AC / 50-60Hz / 0,6A
Output:
12V = / 2,0A
[B]
Physical specification:[/B]
Ambient Temperature +15°C...+35°C
Humidity < 80%
Size (W x D x H): 195 mm x 140 mm x 40 mm
Weight: 1,8 kg without HDD