Foros ZackYFileS

Foros ZackYFileS (http://foros.zackyfiles.com/index.php)
-   PLUGINs & SKINs (http://foros.zackyfiles.com/forumdisplay.php?f=543)
-   -   IPTV player (http://foros.zackyfiles.com/showthread.php?t=694686)

katxomi 18/12/2015 22:27

IPTV player
 
Hola a todos, por si a alguien le interesa copio la info de otro foro para hacer funcionar la ultima version iptv player en nuestros decos.....



What to do to get the most of your STB's IPTV capacity

1) How to install ffmpeg - for both SH4 and MIPSEL platforms

SH4 (STi 7111/7162 processors, i.e. Alien 1/2, for instance) commands in Telnet:

Code:
cd /tmp
wget http://iptvplayer.pl/resources/opena...g_2.7.1.tar.gz
tar -C / -xvf openatv5_sh4_ffmpeg_2.7.1.tar.gz
rm openatv5_sh4_ffmpeg_2.7.1.tar.gz
sync
reboot
MIPSEL platform, mostly Broadcom processors (most of our STBs)

Code:
cd /tmp
wget http://iptvplayer.pl/resources/ffmpe...l_nofpu.tar.gz
tar -xzf ffmpeg2.8.1_mipsel_nofpu.tar.gz -C /
rm ffmpeg2.8.1_mipsel_nofpu.tar.gz
sync
reboot
=====to check the ffmpeg version in your STB=====

Code:
ffmpeg --version
Now, you will be able to install External Player 3, which uses considerably less resources!

SamSamSam says:

"Please do not use standard player, standard and internal players based on E2 and I can not fix E2 player.


Please use external gstplayer (or external eplayer3 if you have box with SH4 CPU) in buffering mode.

You can change player under blue button."

So, now:

2) Install IPTV Player plugin via Telnet commands (if you do not have it in your image's feeds (Plugins > Download plugins > Extensions)

Code:
rm -rf /usr/lib/enigma2/python/Plugins/Extensions/IPTVPlayer
cd /tmp
wget http://iptvplayer.vline.pl/download/...thonX.X.tar.gz
tar -xzf latest.pythonX.X.tar.gz -C /tmp
rm latest.pythonX.X.tar.gz
cp -r iptvplayer-for-e2.git/IPTVPlayer /usr/lib/enigma2/python/Plugins/Extensions/IPTVPlayer
rm -rf iptvplayer-for-e2.git/IPTVPlayer
sync
reboot
3) When you start the plugin (IPTV Player) you will need to continue with some additional installations

Keep:
-confirming all the suggestions, during the installation, which will also guide you to -installing the External Player 3 or External Gstplayer (once the installation finds ffmpeg in your Enigma2) and then
-update the plugin; after that
-configure it carefully (where to send buffering or where to record, how to deal with External Player 3 - render AAC sound via SW etc.).

4) Before choosing an IPTV channel (say, in Web Stream > FilmOn > BBC1, for instance) or what to playback over home network (Media section), one can choose the preferred player, using the blue button menu! With or without buffering etc.

5) For developers, to include the latest in your images

Repo:
https://gitlab.com/iptvplayer-for-e2/iptvplayer-for-e2


Last version with source code:
http://iptvplayer.vline.pl/download/...thonX.X.tar.gz

6) Known issues, as of right now

SH4 version is more advanced and covers more codecs! However, fewer codecs are supported by Mipsel version of ffmpeg/ExtPlayer 3, when IPTV Player v. 82.01.01.00 was published (these may change over time, of course!):

- AAC
- AC3
- MP3
- MPEG
- MPEG2
- H264


Good luck!

=======PLAYBACK OVER HOME NETWORK AND ADDITIONAL INFO=======

If you setup your HDD and USB stick correctly...

Go to IPTV Player and configure it > Cache, buffering, recording paths + the External Player bits, AAC to be done via SW (this is in EP3 part of config).

You have options for streaming: HIGH or LOW bitrate/quality, as well as with or without buffering...

Now, the box is also IPTV capable and it is working well in that department, too!

The author's suggestion:

Quote:
I sugest to continue developing solution based on libeplayer3 initially prepared for SH4 but only some formaters need to be rewritten to MIPSEL.

For example, the folowing stream:

http://www.quirksmode.org/html5/vide...buck_bunny.mp4

played with gstreamer take 80MB of RAM memory where
with libeplayer3 the same stream take only 30MB.

Yes, I know that a new STB models have 1/2/3/4GB of RAM, but this is not only a reason.

Why ffmpeg? Because:
Which is better: FFmpeg or GStreamer? Why? - Quora

ffmpeg is also base for KODI (XBMC) player and works very well as probably we all know.
So, this seems to be the way forward...
__________________


La franja horaria es GMT +2. Ahora son las 20:20.

Powered por vBulletin™ Version 3.8.10
Copyright © 2024 vBulletin Solutions, Inc. All rights reserved.
Traducido por vBsoporte - vBulletin en español
ZackYFileS - Foros de Debate