driver changed at 3 April 2003=
==============================================
Version 6.1.8 v1
Date Dec 18 2003, Time 19:30:46
NO MICOM :
==============================================
FLASH ID: 0x22c4, COM ID: 0x0020
NO_ACKNOWLEDGE with PC.
0xa0,0x00,0xff,0xa0,0x0f,0x41,
[OTA] E2PROM_Read() Checksum OK !
Jump : 0x7feffffe


STAVMEM_Init()=OK
STAVMEM_CreatePartition()=OK
STEVT_Init()=OK
STPWM_Init()=OK
STCLKRV_Init(CLKRV0)=OK
STI2C_Init(back)=Ok
STI2C_Init(front)=Ok
STCLKRV_Open(CLKRV0)=OK
STAUD_Init(AUD0)=Ok
STDENC_Init(DENC0, InvOut 0)=OK
STVTG_Init(VTG0)=Ok
STVID_Init(VID0)=driver changed at 3 April 2003=Ok
OSD_Init___C_0 Detected !!!
[0], CH_ADDR[0xc00b1e1c], CH_IDX[-1073013252], TUN_ADDR[0x7fe19cbc], TUN_IDX[214
5499492]
[0], CH_ADDR[0x00], CH_IDX[-1073013208], TUN_ADDR[0xc0087254], TUN_IDX[214549949
2]
[REREADCLOCK] 2002-1-1, 0: 0. 1
size : 152

=============================================
VERSION : 2.4.0 (2004.02.16)
MODEL : AT-7010DCIZ (BUYER CODE : 10)
DATE : May 26 2003
TIME : 20:17
=============================================

FLASH = 0x22c4
[MC] Version : 02.02.04 Last Update : 2004.09.25
[TTXOSD] Version:02.01.07, Last Update:04.01.06
[PSI] Version:2.1.27, Last Update:04.08.25
[DB] 4000CH, 8FAV, EPG_WEEK:ON, NEW_COLOCK:ON, GUI_T:OFF, __K4_OPTION__:OFF, (50
,4080)
I2C[I2C_E2P_0]= EXIST
Z(16) : 5.8.74 (...)
I2C[I2C_RFMOD]= EXIST
I2C[I2C_MTUNE]= EXIST
I2C[I2C_MCHAN]= EXIST
Hdl->mcChanType = [0x04]
Hdl->mcTuneType = [0x80]
Hdl->mSharpVersion= 1
Hdl->mSharpVersion= 1
####### CI DETECT #######
[CI] Version : 02.02.02 Last Update : 2004.02.02
Hdl->mSharpVersion= 1
Hdl->mcChanType = [0x04]
MMI_TYPE :: MMI_K9
Hdl->mcTuneType = [0x80]
MMI_API_VERSION :: 5.1.6
FE_GetTunerName(0) = SSP9
MMI_FLASH_VERSION :: 1.0.0
FE_GetTunerName(1) = SSP9
MMI_E2PROM_VERSION :: 1.0.1
MMI START OK : fa0
h_av.c, 0749 Error> STAUD_Mute=Err


estos son los resultados con las indicaciones del amigo benielcutre, muchas gracias y espero comentarios

__________________
Kaon Ksc-570z
firm: KSC-570Z_HW12.01.A5_SW03.05.03
satelite:astra(esperando a ver si pongo motor)