Errores de carga y algunas cosas mas
A. Messages and error on the display of the receiver have the following meanings:
Boot - Receiver is booting now;
Good - Process of writing information to the flash memory of the receiver is finished;
UCr - Receiver is in VCR mode;
d.001 - Receiving data from PC to RAM;
F.001 - Flashing data from RAM to flash memory;
(- - - -) - Reading information from flash memory to RAM.
Ota - Process of update from satellite is initiated.
Errors on the display of the receiver:
bERR - Illegal size of the binary file when writing firmware smaller.
Err.0 - CRC error of the firmware.
Err.1 - Memory is not enough when upgrading firmware, or Default data CRC error when powering on.
Err.2 - Illegal binary file size when upgrading firmware.
Err.3 - Transfer error when upgrading firmware.
Err.4 - Fail to write the flash when upgrading firmware.
Err.5 - packet timeout when upgrading firmware.
Err.7 - Packet CRC error when upgrading firmware.
Err.8 - Packet Length error when upgrading firmware.
1Err. - Illegal hardware version when writing firmware.
2Err. - Illegal size of the binary file when writing firmware bigger.
E.027 - Error updating firmware from satellite.
saludo at
|