SL 35s, Board DVB9004(ALI0302)-A2, ALI M3329 B1 0543 TG07
Simpl JTAG cable: DB25 (13) ->TDO, DB25 (5) -> RST, DB25 (4) -> TDI, DB25 (3) -> TCK, DB25 (2) -> TMS

Have tried to readout / flash a SL35s with EJTAG and wrt54g jtag-tool (06.06.2007 16:14). Connetion to the ALI 3329B1 worls. Impcode 00000000110000000101001010001000 (00C05288) has been read out from the processor:
--------------------------------------------------------------------------------------------
C:\temp>wrt54g.exe -backup:wholeflash /skipdetect /instrlen:5 /alienable /fc:1

====================================
WRT54G/GS EJTAG Debrick Utility v4.8
====================================

Probing bus ... Done

Instruction Length set to 5

CPU Chip ID: 00000000000000000000000000000000 (00000000)
*** CHIP DETECTION OVERRIDDEN ***

- EJTAG IMPCODE ....... : 00000000110000000101001010001000 (00C05288)
- EJTAG Version ....... : 1 or 2.0
EJTAG Implementation flags: R4k ASID_8 NoDMA MIPS32

Issuing Processor / Peripheral Reset ... Done
Enabling Memory Writes ... Skipped
Init PrAcc ...
C:\temp>
------------------------------------------------------------------------------


Unfortuately after Init PrAcc the proram stops. I have tested with different PCs: Athlon 700, Athlon 900, Pentium 266. Alltimes the same. Running Windows XP and Windows 2000.

With Athlon XP 2400 the program backed up the flash but I'm shure it read the wrong content. Also the Impcode is a different one with Athlon XP2400.

Has anyone an idea what could be wrong?