Antes de nada debe de aparecer algo asi, con esta llamada:
flaps -probeonly /skipdetect /instrlen:5 /alienable
Código:
====================================
FLAPS MIPS EJTAG Flash Utility v1.0
====================================
Probing bus ... Done
Instruction Length set to 5
CPU Chip ID: 00000000000000000000000000000000 (00000000)
*** CHIP DETECTION OVERRIDDEN ***
- EJTAG IMPCODE ............... : 00000000110000000101001010001000 (00C05288)
- EJTAG Version ............... : 1 or 2.0
- EJTAG Implementation flags .. : R4k ASID_8 NoDMA MIPS32
Issuing Processor / Peripheral Reset ... Done
Enabling Memory Writes ... Skipped
Halting Processor ... <Processor Entered Debug Mode!> ... Done
Init PrAcc ... Done
Clearing Watchdog ... Done
Enabling Flash access (ALi) ... Done
Probing Flash at (Flash Window: 0x1fc00000) ... Done
Probing Flash in byte mode...
Probing Flash at (Flash Window: 0x1fc00000) ... Done
Flash Vendor ID: 00000000000000000000000011000010 (000000C2)
Flash Device ID: 00000000000000000000000001001001 (00000049)
- Flash Chip Window Start .... : 1fc00000
- Flash Chip Window Length ... : 00200000
- Selected Area Start ........ : 00000000
- Selected Area Length ....... : 00000000
*** Found a MXIC 29lv160CB 1Mx16 BotB (2MB) Flash Chip ***
*** REQUESTED OPERATION IS COMPLETE ***
Debe de ser un firmware o dump valido para su receptor.
PD.- Solo lo he probado en el SL65 Ali M3329B1.
|