[QUOTE=meché;3356388]Hi!
Dear Thomas3, is very interesting the matter of the "ecm pids" of the channels, and abusing of your kindness, we would like to learn something on this topic, for that that being appreciated it in advance if has free time to make us a manual with some examples of as and where it is necessary to make the necessary changes so that channels of N2 are illuminated and to fix the ecm correct pids.
To those that we like to have it all orderly one, it is weighed to make it with the control at distance every time that new channels appear or others that no longer emit (he/she wears out many batteries
) disappear. And I think that knowing as making the necessary changes of ecm pids of the channels in the implanted area of "user dates", you could use the channel edit to extract the list, to order it, to restore, and later on of being necessary for the channels without light, place them the ecm pids in the "user again dates", if this was this way possible, although I am surely mistaken and the topic is a lot but complex.
(traducido al inglés, con Lec Power Translator).
--------------------------------------------------
Hola!
Estimado Thomas3, es muy interesante el asunto del ecm pids de los canales, y abusando de tu amabilidad, nos gustaria aprender algo sobre el tema, por lo que agradeciendotelo por adelantado si tuvieses tiempo libre para hacernos un manual de como y donde hay que hacer los cambios necesarios para que se iluminen canales de N2 y arreglar los ecm pids correctos.
A los que nos gusta tenerlo todo ordenado, es pesado hacerlo con el mando a distancia cada vez que aparecen nuevos canales o limpiar los que ya no emiten (se gasta muchas baterias
), y pienso que sabiendo como hacer los cambios necesarios de ecm pids de los canales en la zona implantada de user data, se podria utilizar el channel edit para extraer la lista, ordenarla, restaurar, y posteriormente de ser necesario para los canales que pierdan la luz, volver a colocarles con el editor hexadecimal, los ecm pids en el implantado user data, si esto fuese de esta forma posible, aunque seguramente estoy equivocado y el tema es mas complicado.[/QUOTE]
Hi!
Well.
Each EvilEyes stores the channels after a channel search without ECM pids.
Afterwards with each coded channel the appropriate CA system is selected automatically (V/S/N/I or N/I/V/S etc.).
The firm always takes the CA system, which is listed as the first (in the N2 firm).
That's ok for some channels those coded in several systems, and for other channels not.
But if you have the ECM pid of the desired system and provider in your channel list, then the firm always takes this system /provider.
You can insert the ECM pid with the Hexeditor, but that's very complicated, since thereby still substantially more must be changed. In addition the check sum must be updated with offset 20000.
It's much easier, if the firmware makes it for us.
Each EvilEyes stores the ECM pid automatically in the channel list, if you rename the respective channel. Condition: The channel is decoded.
It depends now, to find different firms which open everything which is possible.
The same channel list only must be copied into several firms.
You can copy each time the complete settings block with keys, thus everything of offset 0...
OFFSET___0__1__2__3__4__5__6__7__8__9__A__B__C__D__E__F_
0x000000 65 76 69 6C 65 79 65 73 00 00 02 10 3F 00 00 00
... to offset 8FFFF:
OFFSET___0__1__2__3__4__5__6__7__8__9__A__B__C__D__E__F_
0x08FFF0 FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF
Now each channel must be renamed (in the receiver), which can be opened.
It must be watched out, which CA system is used.
You can't store the ECM pid for ORF in the Cryptoworks firm and use it in the N2 firm for a N2 decoding of the ORF!
In this case first the P*emiere World provider must be exchanged with the ORF and it must removed the ORF Cryptoworks provider completely from the key menu of the Cryptoworks firm.
And you must added the ORF N2 provider with current IDEA in the key menu.
ECM pid example (ORF in Cryptoworks):
OFFSET___0__1__2__3__4__5__6__7__8__9__A__B__C__D__E__F_
0x027920 FF FF 00 0D 30 00 00 00 00 00 C9 32 0E 00 A0 00
0x027930 A5 00 A0 00 31 A8 00 00 [COLOR="Red"]C9 00 [/COLOR]00 00 4F 52 46 31
0x027940 00 00 00 00 00 00 00 00 00 10 A1 00 A3 80 FF FF
ECM pid example (ORF in Nagra2):
OFFSET___0__1__2__3__4__5__6__7__8__9__A__B__C__D__E__F_
0x027920 FF FF 00 0D 30 00 00 00 00 00 C9 32 0E 00 A0 00
0x027930 A5 00 A0 00 31 A8 00 00 [COLOR="Red"]91 01 [/COLOR]00 00 4F 52 46 31
0x027940 00 00 00 00 00 00 00 00 00 10 A1 00 A3 80 FF FF
For the exchange of the provider only the provider-ID and the M1 RSA-key need to be changed.
But note: Only provider with the same CW inversion can be exchanged!
P*emiere, Kabel Deutschland and ORF have the same CW inversion.
And D*gital+, Polsat and Globo have the same CW inversion.
Because of the provider ID always look for 2x2x2x4x or 2x2x4x in the firm (example: old D*gital+ = 2[COLOR="Red"]4[/COLOR]2[COLOR="Red"]1[/COLOR]2[COLOR="Red"]0[/COLOR]4[COLOR="Red"]1[/COLOR], old Cabo = 2[COLOR="Red"]4[/COLOR]2[COLOR="Red"]9[/COLOR]2[COLOR="Red"]0[/COLOR]4[COLOR="Red"]1[/COLOR], P*emiere = 2[COLOR="Red"]5[/COLOR]2[COLOR="Red"]0[/COLOR]4[COLOR="Red"]1[/COLOR] etc).
You find the same provider ID several times in the firm - all must be exchanged.
Then you must search for the M1 RSA-key (example: P*emiere M1 = 81 29 FB ...)
Replace it with the new M1-key, write the current IDEA's in your key menu and the provider is open.
Adding of new provider is different.
In the Cryptoworks firm you must add once only. In the N2 firm twice.
Cryptoworks firm with Star, Alpen, entavio:
OFFSET____0__1__2__3__4__5__6__7__8__9__A__B__C__D__E__F_
0x1851C0 79 2[COLOR="Red"]5[/COLOR] 2[COLOR="Red"]0[/COLOR] 4[COLOR="Red"]3[/COLOR] F4 C0 C0 [COLOR="Blue"]2A A9 [/COLOR]79 79 41 F4 25 A3 79
0x1851D0 2[COLOR="Red"]5 [/COLOR]2[COLOR="Red"]0[/COLOR] 4[COLOR="Red"]5[/COLOR] F4 C0 C0 [COLOR="Blue"]29 AA [/COLOR]79 24 28 20 41 F4 25 A1
0x1851E0 79 2[COLOR="Red"]5[/COLOR] 2[COLOR="Red"]1[/COLOR] 4[COLOR="Red"]1[/COLOR] F4 C0 C0 [COLOR="Blue"]28 AB [/COLOR]79 79 27 20 20 41 F4
The addresses must be: -1/+1.
Example: First you added Star ([COLOR="Red"]503[/COLOR]) with the address [COLOR="Blue"]2A A9[/COLOR].
Next you added the Alpen ([COLOR="Red"]505[/COLOR]) and the address is [COLOR="Blue"]29[/COLOR] (-1) and [COLOR="Blue"]AA[/COLOR] (+1).
And next you added entavio ([COLOR="Red"]511[/COLOR]) with [COLOR="Blue"]28[/COLOR] (-1) and [COLOR="Blue"]AB[/COLOR] (+1).
N2 Firm with Star and Alpen:
OFFSET____0__1__2__3__4__5__6__7__8__9__A__B__C__D__E__F_
0x185DD0 26 7F D1 73 2F 4F 24 F6 1A 21 89 F1 26 7C 61 26
0x185DE0 F4 21 A1 26 7F 25 20 41 F4 AA 26 7F F4 21 A1 26
0x185DF0 7F 2[COLOR="Red"]5 [/COLOR]2[COLOR="Red"]0[/COLOR] 4[COLOR="Red"]3[/COLOR] F4 AA 26 7F F4 21 A1 26 7F 25 21 41
0x185E00 F4 AA 26 7F F4 21 A1 26 7F 2[COLOR="Red"]5[/COLOR] 2[COLOR="Red"]0[/COLOR] 4[COLOR="Red"]5[/COLOR] F4 AA 26 7F
0x185E10 23 21 20 41 F4 C0 21 A8 27 70 23 1D 21 40 24 FA
All with the same addresses (in these firm before the Provider ID!!!)
and:
OFFSET____0__1__2__3__4__5__6__7__8__9__A__B__C__D__E__F_
0x185FB0 C0 C0 2A AD 21 20 7D 2[COLOR="Red"]5[/COLOR] 2[COLOR="Red"]0[/COLOR] 4[COLOR="Red"]3[/COLOR] F4 2B A4 21 20 7D
0x185FC0 25 20 41 F4 C0 C0 2A A9 21 20 7D 23 21 20 41 F4
0x185FD0 2A AF 21 20 7D 23 20 20 41 F4 C0 C0 2A A3 21 20
0x185FE0 7D 22 21 21 41 F4 2A A9 21 20 7D 22 22 21 41 F4
0x185FF0 C0 C0 29 AD 21 20 7D 41 F4 2A A6 21 20 7D 21 20
0x186000 41 F4 C0 C0 29 AB 21 20 7D 24 28 20 41 F4 2A A1
0x186010 21 20 7D 20 2[COLOR="Red"]5[/COLOR] 2[COLOR="Red"]0[/COLOR] 4[COLOR="Red"]5[/COLOR] F4 2B A6 21 20 7D 7D 7D 27
with different addresses.
You can overwrite in each case only invalid provider.
Regards,
Thomas3