Hi!

With the latest DSR5003 firm (Fourtoutici, Crosat etc.) you have two lines in the key menu for one BISS provider:

First line (key 00): The BISS key
Second line (key 01): Service-ID and Transponder-ID of the BISS channel in hex (for R*I Africa 21 35 30 70 00 01 00 00) - that's the IDENT for the Coship emu

The provider-ID is unimportend - you can write 00 00 01 for the first BISS provider, 00 00 02 for the second BISS provider and so on...

You also can use DCW's in the BISS menu.
Write a valid DCW key (only one part of a public DCW key is valid - either the first or the second half of the public DCW key) to the first line (key 00) from the R*I Africa key.
Line two (key 01 - the IDENT) you do not have to change!

Go to R*I africa (now you have a dark screen). Then go from R*I Africa directly to the channel, which you would like to open with DCW: The channel ist open now.

Naturally you also can overwrite another BISS key with a DCW key.
The whole works with S2K (S*T2000) exactly the same.
In this case you must go from S2K to the DCW channel naturally.

In the SonB-version the BISS keys are not visible in the key menu.
You can edit the BISS / DCW / Cryptoworks keys with UPGRADE-VTT-Crypto.

Regards,
Thomas3

http://babelfish.yahoo.com/