por cierto estos son los datos de mi router zixel 660 hw


System Status

The System Status screen is a tool that you use to monitor your Prestige. Note that these fields are read-only and are meant for diagnostic purposes.


Label Description
System Status

System Name This is the name of your Prestige. It is for identification purposes.
ZyNOS Firmware Version This is the ZyNOS firmware version and the date created. ZyNOS is ZyXEL's proprietary Network Operating System design.

DSL FW Version This is the DSL firmware version associated with your Prestige.
Standard This is the standard that your Prestige is using.
WAN Information
IP Address This is the WAN port IP address.
IP Subnet Mask This is the WAN port IP subnet mask.
Default Gateway This is the IP address of the default gateway, if applicable.
VPI/VCI This is the Virtual Path Identifier and Virtual Channel Identifier that you entered in the first Wizard screen.
LAN Information
MAC Address This is the MAC (Media Access Control) or Ethernet address unique to your Prestige.
IP Address This is the LAN port IP address.
IP Subnet Mask This is the LAN port IP subnet mask.
DHCP This is the WAN port DHCP role - Server, Relay (not all Prestige models) or None.
DHCP Start IP This is the first of the contiguous addresses in the IP address pool.
DHCP Pool Size This is the number of IP addresses in the IP address pool.

WLAN Information
ESSID This is the descriptive name used to identify the Prestige in the wireless LAN.
Channel This is the channel number used by the Prestige now.
WEP This displays the status of WEP data encryption.
Show Statistics Click Show Statistics to see the performance statistics such as number of packets sent and number of packets received for each port.
Statistics

Statistics This screen shows you statistics for the ISP node. Note that these fields are read-only and are meant to be used for diagnostic purposes.

Label Description
System up Time
This is the elapsed time the system has been up.

CPU Load This field specifies the percentage of CPU utilization.
LAN or WAN Port Statistics
This is the WAN or LAN port.

Link Status
This is the status of your WAN link.

Upstream Speed This is the upstream speed of your Prestige.
Downstream Speed This is the downstream speed of your Prestige.
Node-Link This field displays the remote node index number and link type. Link types are PPPoA, ENET, RFC 1483 and PPPoE .
Interface This field displays the type of port.
Status For the WAN port, this displays the port speed and duplex setting if you're using Ethernet encapsulation and down (line is down), idle (line (ppp) idle), dial (starting to trigger a call) and drop (dropping a call) if you're using PPPoE encapsulation.

For a LAN port, this shows the port speed and duplex setting.

TxPkts This field displays the number of packets transmitted on this port.
RxPkts This field displays the number of packets received on this port.
Errors This field displays the number of error packets on this port.
Tx B/s This field displays the number of bytes transmitted in the last second.
Rx B/s This field displays the number of bytes received in the last second.
Up Time This field displays the elapsed time this port has been up.
Collisions This is the number of collisions on this port.
Poll Interval(s) Type the time interval for the browser to refresh system statistics.
Set Interval Click this button to apply the new poll interval you entered in the Poll Interval field above.
Stop Click this button to stop the refreshing of the system statistics.