Nada,no hay manera para que me acepte los comandos de cd non-vol....
esto lo que me da ahora:
Scanning DS Channel at 762000000 Hz...(CCIR)
Scanning DS Channel at 754000000 Hz...(CCIR)
CM> cd docsis_ctl


Instance: Console Thread (0x807e679c)

Active Command Table: CM DOCSIS Control Thread Commands (docsis_ctl)

CM -> docsis_ctl

CM/DocsisCtl> Scanning DS Channel at 746000000 Hz...(CCIR)
Scanning DS Channel at 738000000 Hz...(CCIR)
Scanning DS Channel at 730000000 Hz...(CCIR)
Scanning DS Channel at 722000000 Hz...(CCIR)
Scanning DS Channel at 714000000 Hz...(CCIR)
Scanning DS Channel at 706000000 Hz...(CCI
Scanning DS Channel at 698000000 Hz...(CCIR)
sScanning DS Channel at 690000000 Hz...(CCIR)
Scanning DS Channel at 682000000 Hz...(CCIR)
cScanning DS Channel at 674000000 Hz...(CCIR)
Scanning DS Channel at 666000000 Hz...(CCIR)
aScanning DS Channel at 658000000 Hz...(CCIR)
Scanning DS Channel at 650000000 Hz...(CCIR)
Scanning DS Channel at 642000000 Hz...(CCIR)
Scanning DS Channel at 634000000 Hz...(CCIR)
Scanning DS Channel at 626000000 Hz...(CCIR)
nScanning DS Channel at 618000000 Hz...(CCIR)
Scanning DS Channel at 610000000 Hz...(CCIR)
Scanning DS Channel at 602000000 Hz...(CCIR)
Scanning DS Channel at 594000000 Hz...(CCIR)
Scanning DS Channel at 586000000 Hz...(CCIR)
Scanning DS Channel at 578000000 Hz...(CCIR)
Scanning DS Channel at 570000000 Hz...(CCIR)
Scanning DS Channel at 562000000 Hz...(CCIR)
_Scanning DS Channel at 554000000 Hz...(CCIR)
sScanning DS Channel at 546000000 Hz...(CCIR)
Scanning DS Channel at 538000000 Hz...(CCIR)
Scanning DS Channel at 530000000 Hz...(CCIR)
Scanning DS Channel at 522000000 Hz...(CCIR)
tScanning DS Channel at 514000000 Hz...(CCIR)
Scanning DS Channel at 506000000 Hz...(CCIR)
Scanning DS Channel at 498000000 Hz...(CCIR)
Scanning DS Channel at 490000000 Hz...(CCIR)
Scanning DS Channel at 482000000 Hz...(CCIR)
Scanning DS Channel at 474000000 Hz...(CCIR)
oScanning DS Channel at 466000000 Hz...(CCIR)
Scanning DS Channel at 458000000 Hz...(CCIR)
pScanning DS Channel at 450000000 Hz...(CCIR)
Scanning DS Channel at 442000000 Hz...(CCIR)
Scanning DS Channel at 434000000 Hz...(CCIR)
Scanning DS Channel at 426000000 Hz...(CCIR)
Scanning DS Channel at 418000000 Hz...(CCIR)
Scanning DS Channel at 410000000 Hz...(CCIR)
Scanning DS Channel at 402000000 Hz...(CCIR)
CM/DocsisCtl> scan_stop


Instance: DOCSIS Control Thread (0x807ddcbc)


CM/DocsisCtl> Scanning DS Channel at 394000000 Hz...(CCIR)
CM/DocsisCtl> ip_initialize


Instance: DOCSIS Control Thread (0x807ddcbc)

Forcing the IP stack to initialize itself using the canned DHCP settings.
Starting IP Initialization with DHCP...
DHCP completed successfully!
DHCP: IP address = 10.10.10.10


CM/DocsisCtl> Forcing Time Of Day to accept Jan 1, 1970...
Current system time -> Thu Jan 01 00:00:00 1970

System start time -> Wed Dec 31 23:59:35 1969

Starting Tftp of configuration file...
Time Of Day completed...
CM/DocsisCtl> dload -i 1 -l -f 10.10.10.11 sb5101.mod.10.2.by.fercsa.bin


Instance: DOCSIS Control Thread (0x807ddcbc)

Thomson: allow image download; incompatibility is enabled!
Sending syslog message from IF 1 to 10.10.10.254:
<133> CABLEMODEM [DOCSIS]: <69010100> SW Download INIT - Via NMS SW file: sb51
01.mod.10.2.by.fercsa.bin - SW server: 10.10.10.11.

CM/DocsisCtl> Sending syslog message from IF 1 to 10.10.10.254:
<133> CABLEMODEM [DOCSIS]: <69011100> SW download Successful - Via NMS SW file
: sb5101.mod.10.2.by.fercsa.bin - SW server: 10.10.10.254.
Non-Vol Settings successfully written to the device.

BcmEcosBfcApplication:eInitialize(): Rebooting now so we don't trip all
MemSize: ......................... 8M
Flash detected @0xbe000000

Signature: a806


Broadcom BootLoader Version: 2.1.6d release Gnu
Build Date: Apr 29 2004
Build Time: 17:54:32

Image 1 Program Header:
Signature: 3349
Control: 0000
Major Rev: 0003
Minor Rev: 0000
Build Time: 2006/11/3 02:33:33 Z
File Length: 880468 bytes
Load Address: 80500000
Filename: 5101hack_mod_by_FERCSA.bin
HCS: c6fe
CRC: c19cfc6c

WARNING: Signatures do not match! Don't use this image!

Image 2 Program Hea
Signature: a806
Control: 0005
Major Rev: 0400
Minor Rev: 04ff
Build Time: 2005/6/15 04:24:26 Z
File Length: 773310 bytes
Load Address: 80010000
Filename: ecram_sto.bin
HCS: 36bf
CRC: 09f2f6b6



Enter '1', '2', or 'p' within 2 seconds or take default...
. .

Performing CRC on Image 2...
Detected LZMA compressed image... decompressing...
Target Address: 0x80010000
............
Decompressed length: 3145872

Executing Image 2...


eCos - hal_diag_init
Init device '/dev/ttydiag'
Init tty channel: 802e6248
Init device '/dev/tty0'
Init tty channel: 802e6268
Init device '/dev/haldiag'
HAL/diag SERIAL init
Init device '/dev/ser0'
BCM 33XX SERIAL init - dev: 0.2
Set output buffer - buf: 80317ad0 len: 2048
Set input buffer - buf: 803182d0 len: 2048
BCM 33XX SERIAL config

Reading Permanent settings from non-vol...
Checksum for permanent settings: 0x90d6984e
Settings were read and verified.


Reading Dynamic settings from non-vol...
Checksum for dynamic settings: 0xd4b4b175
Settings were read an

Function: SetHardcodeVendorProfile
The ProfileMagic of image is not equal to 0xFFAAAAFF!!!

vvv Interface creation and driver startup beginning vvv

-> Begin DOCSIS CM WAN interface
Creating HAL object for the DOCSIS CableModem interface
Registering DOCSIS CableModem driver
-> End DOCSIS CM WAN interface

-> Begin Ethernet LAN interfaces
Creating HAL object for the Ethernet interface
Registering Ethernet driver
-> End Ethernet LAN interfaces

-> Begin USB LAN interface
Creating HAL object for the USB interface
Registering USB driver
-> End USB LAN interface

-> Begin IP Stack interfaces
-> Starting V2 DHCP Client subsystem...
Creating HAL object for IP Stack1 (MAC Addr=xx.xx.xx:xx:xx:xx)
Registering IP Stack1 driver

Creating HAL object for IP Stack2 (MAC Addr=00:10:95:ff:ff:fe)
Registering IP Stack2 driver

IP Stack3 not enabled or failed to create and start interface; no other
stacks will be loaded.
-> End IP Stack interf

^^^ Interface creation and driver startup complete ^^^
Flash detected @0xbe000000

Propane version: 2.0.1 (28 Oct 2002)


Broadcom BootLoade
Creating SNMP agent cablemodem agent
DON'T think we need to go here - so don't:::: init_mib !!!!e: 17:54:32

Image 1 Program Header:
WARNING: netsnmp_brcm_create_tstring called with no address! Control: 0000
Major Rev: 0002
Creating SNMP agent CPE diag agent
Build Time: 2006/11
^^^^^^device mode Thomson Diag-Event ***
File Length: 966267 bytes
HTTP server initialization complete.00000
File


*H.bin
* * HCS: af81
* *

WARNING:
* *t use this image!
* *

Image 2 Progr
* * * * * *
Init device '/dev/tty0'

* *
Init device '/dev/hald

Broadcom Corporation Reference Design SERIAL init
Init

+----------------------------------------------------------------------------+
Set output buffer - buf: 80317ad0 len: 2048
| _/_/ _/_/_/_/ _/_/ |
BCM 33XX SERIAL config
| _/ _/ _/ _/ _/ Broadband |
Checksum for permanent settings: 0x90d6984e
| _/ _/ _/ _/ |


Reading Dynamic settings from non-vol...
| _/_/ _/_/_/ _/ Foundation
Settings were read an
+----------------------------------------------------------------------------+

Creating HAL object for IP Stack2 (MAC Addr=00:10:95:ff:ff:fe)
| Standard Embedded Target Support for BFC |tering IP Stack2 driver

IP Stack3
| |
stacks will be loa
* *
| eCos BFC Application Layer |
* *

| | *
* *
| Copyright (c) 1999 - 2004 Broadcom Corporation |
* *

| | * * *

| Revision: 3.0.2 PRE-RELEASE |
* * * * * * *
| _/ _/ _/ _/ |
| _/_/ _/ _/ |
| |
| Copyright (c) 1999 - 2005 Broadcom Corporation |
| |
| Revision: 3.6.13 PRE-RELEASE |
| |
| Features: AckCel(tm) DOCSIS 1.0/1.1/2.0 Propane(tm) CM SNMP w/Factory MIB |
| Features: Support CM Vendor Extension |
+----------------------------------------------------------------------------+
| Unknown CM vendor extension |
| |
| The vendor's CmApplication object should override this method to set |
| appropriate version banner info. |
| |
| Revision: Unknown version PRE-RELEASE |
| |
| Features: Unknown features |
+----------------------------------------------------------------------------+
| Build Date: Jun 15 2005 |
| Build Time: 12:24:17 |
| Built By: lenny |
+----------------------------------------------------------------------------+


Running the system...ole Cmds, (no Idle Lo

We can support 232 IP filters.|
S We can support 590 LLC filters.
+------------------
canning DS Channel at 626000000 Hz...(Last Good)---------+

Type 'help' or '?' for a list of commands... _/_/ _/ _/

CM> Scanning DS Channel at 626000000 Hz...(Last Good)
Scanning DS Channel at 626000000 Hz...(Last Good)m |
Scanning DS Channel at 626000000 Hz...(Last Good)
| _/ _/ _/ _/
cScanning DS Channel at 626000000 Hz...(Last Good)
CM> cd dScanning DS Channel at 114000000 Hz...
| _/ _/ _/
Scanning DS Channel at 155125000 Hz...(Scan List)
Scanning DS Channel at 122500000 Hz...(Scan List) |
Scanning DS Channel at 307750000 Hz...(Scan List)
| _/_/ _/
cScanning DS Channel at 132000000 Hz...(Scan List) |
Scanning DS Channel at 147125000 Hz...(Scan List)
Scanning DS Channel at 319750000 Hz...(Scan List)

Scanning DS Channel at 115000000 Hz...(Scan List) |
Scanning DS Channel at 160000000 Hz...(Scan List)

sScanning DS Channel at 129000000 Hz...(Scan List) |
Scanning DS Channel at 313750000 Hz...(Scan List)
| Features: AckCe
isScanning DS Channel at 154750000 Hz...(Scan List)ry MIB |
Scanning DS Channel at 325750000 Hz...(Scan List) Support CM Vendor Extension
Scanning DS Channel at 393750000 Hz...(Scan List)
+
Scanning DS Channel at 509000000 Hz...(Scan List)--------------------------+
Scanning DS Channel at 858000000 Hz...(CCIR)

Scanning DS Channel at 826000000 Hz...(CCIR)
| The vendor's CmApplication object sh
Scanning DS Channel at 818000000 Hz...(CCIR)
Scanning DS Channel at 810000000 Hz...(CCIR) version banner info.
cScanning DS Channel at 802000000 Hz...(CCIR)
Scanning DS Channel at 794000000 Hz...(CCIR) |
Scanning DS Channel at 786000000 Hz...(CCIR)
| Revisi
Scanning DS Channel at 778000000 Hz...(CCIR) |
Scanning DS Channel at 770000000 Hz...(CCIR)

Scanning DS Channel at 738000000 Hz...(CCIR)
+-------------------------------------
Scanning DS Channel at 730000000 Hz...(CCIR)
lScanning DS Channel at 722000000 Hz...(CCIR) Jun 15 2005
Scanning DS Channel at 714000000 Hz...(CCIR)
Scanning DS Channel at 706000000 Hz...(CCIR) |
Scanning DS Channel at 698000000 Hz...(CCIR)
| Built
CM> cd docsis_ctl


Instance: Console Thread (0x807e679c)

Active Command Table: CM DOCSIS Control Thread Comm
CM/DocsisCtl> Scanning DS Channel at 690000000 Hz...(CCIR)
Scanning DS Channel at 682000000 Hz...(CCIR)

We can support 232 IP filters.
Scanning DS Channel at 674000000 Hz...(CCIR)rt 590 LLC filters.
Scanning DS Channel at 666000000 Hz...(CCIR)..(Last Good)
Scanning DS Channel at 658000000 Hz...(CCIR)ist of commands...
Scanning DS Channel at 650000000 Hz...(CCIR)t 626000000 Hz...(Last Good)
sScanning DS Channel at 642000000 Hz...(CCIR) DS Channel at 626000000 Hz...(Last Good)
Scanning DS Channel at 634000000 Hz...(CCIR)
Scanning DS Channel at 626000000 Hz...(Last
Scanning DS Channel at 626000000 Hz...(CCIR)
CM> cd Scanning DS Channel at 626
cScanning DS Channel at 618000000 Hz...(CCIR)
doScanning
Scanning DS Channel at 610000000 H
Scanning DS Channel at 562000000 Hz...(CCIR)
sScanning DS Channel at 132000000 Hz...(
Scanning DS Channel at 554000000 Hz...(CCIR)
Scanning DS Channel at 14712
Scanning DS Channel at 546000000 Hz...(CCIR)
Scanning DS Channe
Scanning DS Channel at 538000000 Hz...(CCIR)
Scanning
_Scanning DS Channel at 530000000 Hz...(CCIR)

Scanning DS Channel at 522000000 Hz...(CCIR)List)
Scanning DS Channel at 474000000 Hz...(CCIR)
_Scanning DS Channel at 154750000 Hz
Scanning DS Channel at 466000000 Hz...(CCIR)
Scanning DS Channel at 3
Scanning DS Channel at 458000000 Hz...(CCIR)
cScanning DS C
Scanning DS Channel at 450000000 Hz...(CCIR)
Sc
sScanning DS Channel at 442000000 Hz...(CCIR))
Scanning DS Channel at 434000000 Hz...(CCIR)CCIR)
Scanning DS Channel at 394000000 Hz...(CCIR)R)
toScanning DS Channel at 386000000 Hz...(CCIR)
S
Scanning DS Channel at 378000000 Hz...(CCIR)
l
Scanning DS Channel at 370000000 Hz...(CCIR)
Scanning DS Channel at 346000000 Hz...(CCIR)
Scanning DS Channel at 338000000 Hz...(CCIR)
Scanning DS Channel at 330000000 Hz...(CCIR)
Scanning DS Channel at 322000000 Hz...(CCIR)
Scanning DS Channel at 314000000 Hz...(CCIR)
CM/DocsisCtl> scan_stop


Instance: DOCSIS Control Thread (0x807ddcbc)


CM/DocsisCtl> Scanning DS Channel at 306000000 Hz...(CCIR)
CM/DocsisCtl> cd non-vol


Instance: Console Thread (0x807e679c)

Specified subtable ('non-vol' doesn't exist! Can't change to it...

Active Command Table: CM DOCSIS Control Thread Commands (docsis_ctl)

CM -> docsis_ctl

CM/DocsisCtl>
Y cuando le dor a dir me da esto:
CM/DocsisCtl> dir


Instance: Console Thread (0x807e679c)

! ? REM cd dir
find_command help history instances ls
man pwd sleep syntax system_time
usage
----
ClearCmCert binarySfid bpiShow cfg_hex_show cfg_tlv_show
clear_image comp_mac_to_phy comp_phy_to_mac copy_image dload
dload_all dsdiag dsx_show dump_flash goto_ds
goto_us igmpShow ip_initialize ip_show log_messages
map_debug modem_caps rate_shaping_enable rng_rsp
scan_stop showFlows state stop_download ucdShow
ucddiag up_dis us_phy_oh_show usdiag
----

CM/DocsisCtl>
O sea no existe tales comandos.
Alguna sugerencia?.gracias.

Se me olvido decir que es un TCM 420.

Tengo el mismo problema que tú. No puedo entrar en non-vol.

Aver si alguien nos echa una mano

Escribe

cd / enter, para volver atras al directorio CM

Y ya a continuacion

cd non-vol

__________________
Saludos

[SIZE=4][COLOR=Navy]Señor Todopoderoso, Tu que todo lo puedes, dame paciencia................Pero, ¡¡¡ Cojones ,DAMELA YA !!![/COLOR][/SIZE]

Buscando en otros foros he encontrado una captura de un 420 en su secuencia de arranque, y me he fijado que sólo tenía la imagen 1, y la 2 estaba corrupta, con lo cual arrancaba en la 1.

A mi lo que me pasaba es que me arrancaba en la 2, y x eso no podia acceder al firm que ya había instalado, donde está el directorio non-vol,(x cierto sólo hace falta meterle el archivo de fersca 860Kb).

La solucion a sido poner:
cd doc
delete_image -i 2

os pregunta que si la queréis borrar, le dais a y, y ya está.
cd /
reset

ya arranca desde la imagen 1.

Espero que os sirva a todos. Grasias a todos.