Hi everybody

I have a SL35 with a ALI M3329C E1 ship which is inside, it is not a /S sl35.
The flash memory is M29W160EB.

Following an operation mistake, (try to insert a soft non usable with this Comag), i have my comag which don't accept anything now. It swithchs on an stays with the light ON. And it seems locked.

I made a simple jtag like this post :

http://foros.zackyfiles.com/showthread.php?t=536990

And with recommandations from JUBAMO i put the following data:

Base address: BFC00000
Flash type: AMD- 8 bits
Fast AMD/SPI

So the demo answer correctly but now i have a problem tu erase the flash memory and i have always that:

Test version
-----------------------------------------------------------------------
Selected work mode with Ali M332x
CPU ID = 0000
Ali M332x
IMPCODE = C05288
EJTAG version
1 èëè 2.0
EJTAG functions : R4k ASID_8 NoDMA MIPS32
Select DMA mode, but not support by CPU
Init DMA mode ... Skipped
Init Debug Mode ... >Debug mode ??!< ... Done
Init PrAcc ... Done
Clearing Watchdog ... Skipped
Init Flash Access (ALi) ... Done
Ali version = 3327
Configuring SDRAM (ALi) ... Done
-------- Detecting flash --------
Flash Base = 0xBFC00000
First 16 byte of flashe :
00E3 1000 0000 0000 0100 0000 434E 4352

CFI = Q, R, Y
CFI flash found
VENDOR ID = 0002
CFI report: AMD-compatible flash
Found flash : ManufactureID = 0020 DeviceID = 0049

Read form CFI
Flash size = 2097152
Block count = 4
Region = 0; Block size = 16384; Block count = 1
Region = 1; Block size = 8192; Block count = 2
Region = 2; Block size = 32768; Block count = 1
Region = 3; Block size = 65536; Block count = 31
Done
First 16 byte of flashe + Offset 0000 :
00E3 1000 0000 0000 0100 0000 434E 4352

Erasing 4 block(s)...
Erasing block 1 with addr = 0000
Block not cleared 1 with addr = 0000
Error erasing block 1 with addr = 0000

and it stops here.

Could you help me ?

Thanks,

Soristel

Hello Soristel,

Read in the german board
h**p://www.sat-ulc.com/ulc/thread.php?threadid=41092&threadview=0&hilight=&hilightuser=0&page=36

and find in Recursos SAT:5 or Goo gle flaps_e1

greetings.

Hi everybody.

Thanks you very much Jubamo. Its worked perfectly. The demo is now operationnal.

Now, it is possible to receipt T*P*S with this demo ?

Thanks
Soristel

Hi everybody.

Thanks you very much Jubamo. Its worked perfectly. The demo is now operationnal.

Now, it is possible to receipt T*P*S with this demo ?

Thanks
Soristel

Hello Soristel,

I cannot say nothing on firmware that it goes flaps-e1 along with, that must look in the german.